Doors Guide

Accordion Folding Doors Section


 


Social bookmarking
You like it? Share it!
socialize it

Newsletter

Subscribe to our newsletter AND receive our exclusive Special Report on Doors
Email:
First Name:



Main Accordion Folding Doors sponsors


 

Latest Accordion Folding Doors Link Added

INSERT YOUR OWN BANNER HERE

Submit your link on Accordion Folding Doors!



 

Welcome to Doors Guide

 

Accordion Folding Doors Article

Thumbnail example. For a permanent link to this article, or to bookmark it for further reading, click here.

7. Hanging doors

from:

External doors

External doors are available in a variety of materials with varying levels of security and insulation. A steel or steel-coated door and hardwood doors are the strongest, whilst UPVC and fibreglass doors are the best insulators. Wooden doors need regular waterproofing, although hardwood requires lower maintenance than softwood.

Internal doors

Choose between a wide range of styles and wood types to suit your home and budget, including traditional panel doors, rustic ledge-and-brace doors, and plain flush doors, which are available in solid or cheaper hollow versions. Glazed doors increase the volume of light into a room, but they must conform to any applicable glazing regulations. Folding doors operate on a sliding rail mechanism and are often used for cupboard doors or slatted louver doors. Many internal doors now have soundproof or fireproof properties.

Hinges

The type of hinges you buy will depend on whether you want the door to open the normal 90º (by using a butt hinge) or a full 180º so that the door lies flat against the wall (a parliament hinge). If you have thick carpet or tiles, a rising butt hinge will raise the door as it opens, so it does not catch on the floor. Two hinges will be sufficient for most doors, but heavy hardwood or metal doors may need three hinges to support them.

Hanging a door

Trim the excess stiles, or ‘horns' of wood protruding from the frame using a panel saw.

Get somebody to help you support the door as you check the fit of the door in the doorway. There should be at least 2mm (1/10in) clearance around the door to prevent it sticking and more than this if your flooring is uneven.

If the door is too large, plane it to size: Use a spirit level to draw a cutting line, and plane from the outside edges towards the centre of the surface you are trimming.

Decide which way the door is to open to determine which side the hinges are to be fixed to. Hinges should be placed 150mm (6in) from the top and bottom of the door. Place the hinges on the door edge and mark their positions with a pencil.

Use a chisel and hammer to cut out the marked area to the depth of the hinge to allow it to fit flush with the surface. This will be easier if you cut slits into the wood to lever up.

Holding the hinge in place, mark the position of the screw holes. Drill one pilot hole first and check to make sure the position is correct. Screw the hinge in place.

Mark out the position of the hinge in the same way on the doorframe and cut out a recess to allow the hinge to sit flush with the surface.

Stand the door in place to check the alignment of screw holes before drilling the holes in the doorframe.

Attach the hinge to the doorframe.



Other Accordion Folding Doors related Articles

How To Apply Door Casing
Replacing An Interior Door
Installing A Dead Bolt On An Exterior Door
Fitting Front Door Furniture
French Doors Bring The Outdoor Inside

Do you want to contribute to our site : submit your articles HERE


 

Accordion Folding Doors News

Apartment Therapy contest highlights creative, small spaces - azcentral


Apartment Therapy contest highlights creative, small spaces
azcentral
The next thing I do is remove doors. We had these accordion folding doors in the closet and doors in the bedroom and the bathroom that took up a lot of space. I built a sliding door out of wool industrial felt. Q: Have you learned any new design tricks ...

and more »

Read more...


Is Origami the Future of Tech? - BusinessWeek


Is Origami the Future of Tech?
BusinessWeek
To create the wiring for the joints, Rus and Wood cut copper-laminated plastic into a mesh so it could expand, accordion-like, across the folds while still carrying a current. The robot's muscles were thin foil strips made of a “shape memory” metal ...

and more »

Read more...


Junction City Man Saves Little Girl From Dangerous Porch Collapse - WIBW


Junction City Man Saves Little Girl From Dangerous Porch Collapse
WIBW
It comes down and folds me up into an accordion basically- shoves my head and chin into my chest, breaks my sternum, cracks my ribs, collapses a lung at that point. Then my chest collapsed onto my hips and did damage to my spine.

Read more...


Is Your Home in Shape for Hurricane Season? - Fox Business


Is Your Home in Shape for Hurricane Season?
Fox Business
"Those are products that are cheap and can't get product approval," she says. Some coverings are permanent attachments to the building, such as accordion shutters. They rest folded and highly visible on either side of your windows.

Read more...


Art that's not necessarily for the faint of heart - Edmonton Journal


Art that's not necessarily for the faint of heart
Edmonton Journal
The mural is an evolution of the Foldy Books of Death (FBoD) he started in 2008, handmade accordion-fold books that record Forbes's “creative/narrative/image-making/material-based artistic impulses.” Drawing inspiration from high and low culture, ...

and more »

Read more...