Basement Guide

Insulating Basements Section


 


Social bookmarking
You like it? Share it!
socialize it

Newsletter

Subscribe to our newsletter AND receive our exclusive Special Report on Basement
Email:
First Name:



Main Insulating Basements sponsors


 

Latest Insulating Basements Link Added

INSERT YOUR OWN BANNER HERE

Submit your link on Insulating Basements!



 

Welcome to Basement Guide

 

Insulating Basements Article

Thumbnail example. For a permanent link to this article, or to bookmark it for further reading, click here.

Radon Gas is a Poison

from:

If you have an unfinished basement, and you’re looking to turn it into some sort of living space, you may need to test it for Radon gas. To give you some background, Radon is a naturally occurring gas that is also radioactive. In some areas of the world, it’s not a problem, but some residential developments – those built back in the 1950’s and 60’s, and that used a lot of fill from borrow pits – have soil that is rich in Radon. As a result, the gas can seep into your home, and lung cancer can result from long term exposure.

So, how to test for Radon gas? One simple and inexpensive method is to get a series of small canister testing kits. These are round metal dishes – about the size of a lady’s compact – and they have a small opening to allow for air to enter. The first step in testing your basement is to drill a few small holes in the concrete flooring. For this, you’ll need a concrete drill bit, and a powerful drill. Make several holes – about half an inch in diameter – across the floor.

Next, you need to determine if air is flowing across the ground under the concrete. A cheap and easy way of doing that is to use cigarettes and a vacuum. Light enough cigarettes so that you can place one at each hole – save one. After that, place a vacuum at the remaining hole, and turn it on. If the smoke rising from the cigarettes gets sucked down into their holes, you’ve got air flow! This is bad news if you end up having a high level of Radon; it means that that the gas can flow freely about your basement.

The next step is the placement of the testing kits. Put one at each hole, remove the cover, and leave them in place for 24 hours. After that, put the covers back on, and mail them off to the testing lab. Usually, the kits come with self-addressed, stamped envelopes for the kits, and then they send you the results.

If you can’t buy a simple testing kit, there are companies that will come out to your home and set up a unit to run a one-day test. These are usually small devices – about the size of a laptop computer – and they sniff the air every few minutes, test it for Radon, and then print out the results on a roll of paper. These tests are quicker than the other kind – you get results in a day – but usually more expensive, as you have to hire a firm to do them.

Still, no matter the method, if your area is prone to high levels of Radon gas, get your basement tested before getting it finished.




 

Insulating Basements News

NHSPCA Energy Upgrades to Save $50K Annually - Patch.com


NHSPCA Energy Upgrades to Save $50K Annually
Patch.com
The agency chose three specific projects: a) insulating and air sealing the basements and attic to reduce air infiltration and increase insulation value, b) solar thermal collectors to preheat the vast amount of water used and c) wood pellet boilers as ...

Read more...


Construction systems help to speed building process - Chicago Tribune


Construction systems help to speed building process
Chicago Tribune
Wertheim, based in Asheville, NC, says, "The walls come pre-insulated, so they provide the homeowners with an energy-efficient basement. And the builders appreciate using them because they install in less than a day." This means a builder — on a new ...

Read more...


My Home Demolition: Heating and air conditioning - Washington Post (blog)


My Home Demolition: Heating and air conditioning
Washington Post (blog)
During my visit to the green building supplier Amicus Green, we talked about insulation materials and what to put in all the places from the bottom of the basement to the underside of the roof. I had never thought about insulating underneath the ...

Read more...


Adding function to a house with a 1970s angled floor plan - AnnArbor.com


Adding function to a house with a 1970s angled floor plan
AnnArbor.com
The double entries (A&B) were congested and not really necessary since the homeowners thoroughly insulated this minimally insulated home. The stair to the basement in an airlock entry (B) was considered dangerous by the mature couple.

Read more...


Golden Gate ASHI Inspectors say California Building Code Changes Potentially ... - PR Web (press release)


Golden Gate ASHI Inspectors say California Building Code Changes Potentially ...
PR Web (press release)
About Attics and Basements. Developing attics and basements presents challenges beyond headroom, including insulation and structural adequacy. A converted attic may constitute an added story that requires a foundation upgrade or may trigger other local ...

Read more...